Вам Коктейль из - Galaxy Note 3 или iPhone6 Plus?

Galaxy Note 3 vs iPhone6 Plus http://tipontheday.blogspot.com

Аппарат в работе!!!

Здоровый завтрак за 3 минуты 

Один из методов не болеть  

Как правильно - быстро и качественно вязать арматуру.

Дорогие друзья поделюсь немного информацией которая не доступна каждому, хотя не буду спорить, многие из вас сразу узнают о чём пойдёт речь

Арматуру связывают при бетонировании конструкций, желательно сварка или плотная проволочная связка, всё другие методы очень дорогие, ктото предлагает использовать скрепки. Идея не удачная поскольку матерьял на скрепки должен быть довольно прочным а прочный материал не экономичен.

 Все оригинальное довольно просто, используем проволоку и крючок для намотки её, в одно время я работал на бетоне, и из моих воспоминаний работа, с правильными технологиями приносила только удовольствие.

Для работы нап понадобиться:

1 нарезанная проволока

2 а) инструмент для намотки проволоки.

б)Електронный инструмент для намотки провода
Проволока Инструменты Арматура, RB395, рулевая инструментов



Изображение только для справки
Фактический пункт может отличаться
Нажмите на изображение для увеличения

Производитель: MAX США CORP
Модель: RB395
Ежедневно: 50.00 $
Еженедельно: $ 150.00
Ежемесячно: $ 450.00
Комментарии:
ВЕС 5.2 фунта
РАЗМЕРЫ 11-5 / 8 "(В) х 4" (Ш) х 11-3 / 8 "(Л)
СОПУТСТВУЮЩИЕ скоростью менее одной секунды
Количества обмоток НА TIE 3 обертывания / галстук (21 Ga. Провод)
RE-БАР РАЗМЕР # 3 х # 3 # 5 # 6 х
Вязальной проволоки: TW897 (Обычный стальной проволоки), TW897-EG (электро оцинкованной проволоки), TW897-ПК (полиэстер-покрытием проволоки)

На обмотку одной проволоки у набитой руки уходит менее чем 5 секунд в среднем.
Удачи в работе


Примеры:

Используем кусачки с механизмом
ReBar Wire Tying Tool by CRESCO, LLC

Иаспользуем пистолет
Max ReBar Tier RB397 Instructional video

Используя неподкотовленную проволоку

Беспроводной инструмент порвет всех
MAX Rebar Wire Tying Cordless Tool

How to Unlock Samsung Galaxy S5 Free - Unlocking Tutorial & Guide (SM-G900H, SM-G900R4, SM-G900F)

Samsung Unlocking

Imei Repairs , Unlocking all the samsung in the world!

• Home
• SUPPORTED MODELS FOR UNLOCKING/ REPAIR
• How to Install TeamViewer
• What You Need To Get Unlock By Us
• Happy Customer FeedBack

Galaxy S6 All update build

Sprint Galaxy S6 edge update build G925PVPU3BOJ7, Features Sprint Global Roaming and Security Patches

Following Sprint Galaxy S6 (SM-G920P) to which got an update to build G920PVPU3BOJ7, Sprint Galaxy S6 edge (SM-G925P) is also received an update to build G925PVPU3BOJ7. According to Sprint, the update mainly features the Sprint Global Roaming support.  Along with the update  is the Google security patches and unmentioned bug fixes. This update will  now replace the previously releasedbuild G925PVPU3BOI1 that has been added with Samsung Pay.

Technical details G925PVPU3BOJ7 5.1.1 Update:

• Device: Samsung Galaxy S6 edge (Sprint)
• Model number: SM-G925P
• Android version: 5.1.1
• Baseband version: G925PVPU3BOJ7
• Kernel version: 3.10.61.5496010
• Build number: LMY47X.G925PVPU3BOJ7

Features/Enhancements:

• Sprint Global Roaming
• Google Security Patch
• Bug Fixes

This update is rolling out in stages, so if ever you did not received the notification yet, you may just keep on checking by going into the phone’s Settings > About device > Check for an update. The firmware server refreshes once in every hour, so just continue doing it until it says that the update is available for download.
Also, keep in mind that you cannot get the update if you have rooted or have a modified system running on your Sprint Samsung Galaxy S6 (SM-G920P).   Your device must have to be still run with the official firmware within the system.

Source: Sprint S6 edge support

T-Mobile Galaxy S6 SM-G920T update build G920TUVU3DOJ7, bringing more improvements to performance

T-Mobile has sent out once again an update to the Galaxy S6 (SM-G920T) owners, to which will bump up its current Android 5.1.1 to build G920TUVU3DOJ7.  This is now the 5th time around this device receives the Android 5.1.1 Lollipop treatment.

According to T-Mobile,  which has just released the announcement, the said DOJ7 update mainly brings software improvements,
a Google Security update, and various bug fixes.

Here are the details of the update build G920TUVU3DOJ7:

Device name: Samsung Galaxy S6 (T-Mobile USA)
Model number: SM-G920T
Android version: 5.1.1
Baseband version: G920TUVU3DOJ7
Kernel Version: 3.10.61-5756057
Build Number: LMY47X.G920TUVU3DOJ7
SE for Android Status: Enforcing
AP: G920TUVU2DOJ7
CSC: G920TTMB2DOJ7
CP:  G920TUVU2DOJ7

Changelog of G920TUVU2DOJ7:

• Overall device performance has been improved.
• Battery life has been optimized.
• The stability of Call has been improved.
• The security of your device has been improved.
• Optimized closing unused applications.
• Removed new application. – Milk Video

Screenshot of G920TUVU3DOJ7 update to which can be viewed in device settings > About device.

This will replace the previously released build G920TUVU3DOI1 that had been released earlier in September. The G920TUVU3DOJ7 file size is around 97.56 MB and is now available via Over-The-Air (OTA) Update in small batches between today, November 16, and will last until December 4. To check whether your Galaxy S6 phone is among the first devices to get the update, just head to your device Settings > About device > Software update. You may also try using the Samsung Smart Switch for PC if you did not make it through via OTA update.

Source: T-Mobile support doc

Update build G925TUVU3DOJ7 on T-Mobile Galaxy S6 edge SM-G925T, Improved Performance and Security Added

The T-Mobile Galaxy S6 edge (SM-G925T) has also received an updated Android 5.1.1 to which bump up its build version to G925TUVU3DOJ7. The latter is the same update that has just also recently released on the Galaxy S6 (SM-G920T) via OTA and Smart Switch for PC.  The DOJ7 update is said to bring more improvements to the device OS, it is also added with Google Security update, and various bug fixes, according to T-Mobile.

Here are the details of the update build G925TUVU3DOJ7:

Device name: Samsung Galaxy S6 edge  (T-Mobile USA)
Model number: SM-G925T
Android version: 5.1.1
Baseband version: G925TUVU3DOJ7
Kernel Version: 3.10.61-5756057
Build Number: LMY47X.G925TUVU3DOJ7
SE for Android Status: Enforcing
AP: G925TUVU2DOJ7
CSC: G925TTMB2DOJ7
CP:  G925TUVU2DOJ7

Changelog of G925TUVU2DOJ7:

• Overall device performance has been improved.
• Battery life has been optimized.
• The stability of Call has been improved.
• The security of your device has been improved.
• Optimized closing unused applications.
• Removed new application. – Milk Video

Screenshot of G925TUVU3DOJ7 update, this details can be viewed in device settings > About device.

The G925TUVU3DOJ7 update  is at around 96.22 MB in file size, and it is currently released via Over-The-Air (OTA) update in stages between today, November 16, and will last until December 4  To check whether your Galaxy S6 phone is among the first devices to get the update, just head to your device Settings > About device > Software update. You may also try using the Samsung Smart Switch for PC if you did not make it through via OTA update.

Source: T-Mobile support doc

Imei Cert For G920P G925P G920V G925V

We Have Certs For G920P G925P G920V G925V

 We Only Have Bulk Min Of 40 Or More


Message Us

 Skype Us OnlyPartsBuyandResell

T-Mobile Note 5 and S6 Edge Plus OTA update (COJ5) rolling out with Gear VR support, Security patches and bug fixes

Samsung is rolling out OTA updates to Galaxy Note 5 and S6 Edge Plus with build numbers N920TUVU2COJ5 and G928TUVU2COJ5, respectively.

As per the official changelog, the update brings support for Gear VR to both the devices along with security patches and various bug fixes and improvements.

In case you don’t know, Samsung Gear VR is a virtual reality device by Samsung, in which you can put your Samsung device and see videos, movies, etc. in a fully immersive theatre like experience. The COJ5 update brings support for Gear VR to T-Mobile Note 5 and S6 Edge Plus, but to take benefit of it, you need to purchase the Samsung Gear VR separately.

The updates are already on the roll as we speak. If you haven’t received the OTA update notification yet on your T-Mobile Note 5 or S6 Edge Plus, go to Settings > About phone > Software updates section and manually check for the update.

For the rooted users, we wouldn’t yet recommend to install the OTA update to either of the devices. Chances are good that the OJ5 OTA update will break root on your T-Mobile Note 5 and S6 Edge Plus.

If you care about root access, we’d recommend you to wait for the folks over at xda to confirm if the newer builds are easily rootable with the previous rooting methods (custom kernels), or a new custom kernel will be required for the latest build. If a new custom kernel with SELinux set to Permissive is indeed required, then it’ll be better for you to wait for the developers to build one before install the OJ5 OTA update.

Not Marshmallow but new update rolling out for AT&T Galaxy Note 5 (build G920AUCU1AOJ1)

We know you are holding out for Marshmallow update for your AT&T Note 5, but today isn’t the day you get it even though you are going to receive an update notification today. A new 5.1.1 update is rolling out today for the Note 5 at AT&T with build no. ending with AOJ1 (full build no. isG920AUCU1AOJ1). The update’s size is 119-132 MB but it could easily vary depending on your current build number. It’s based on Android 5.1.1, not 6.0.

We expect Samsung to roll our Note 5 Marshmallow update soon too, with December end release most likely timing for this to happen.

The official changelog for the AOJ7 update is available from AT&T, and it doesn’t include anything spectacular but because you would want to know it in full, and we have it, here it is.

• Support for additional Gear VR features
• Support for Android for Work (AfW)
• Enhanced support for the Samsung keyboard accessory
• Updated Samsung Knox to version 2.5.1
• Other general fixes

To check for an update now on your device, go to Settings > About device > Software update, and then tap on ‘check for update’ button.

It’s a small update, one that you could easily skip if you just don’t wanna update the device for the moment.

SAMSUNG GALAXY S6 Edge+, all model

• Stock Auto-root kernel for Galaxy S6 Edge+
  • Model no. SM-G928F — Link
  • Model no. SM-G92oi — Link
  • Model no. SM-G928C — Link
  • Model no. SM-G928S — Link
  • Model no. SM-G928K — Link
  • Model no. SM-G928L — Link
  • Model no. SM-G928T — Link
  • Model no. SM-G928W8 — Link
  • Model no. SM-G928P – Link (Alternate kernel link)
  • Model no. SM-G928A – not available
  • Model no. SM-G928V – not available
  • Model no. SM-G928R4 – not available
• Odin PC software — Link | File: Odin-3-10-7.zip (1.03 MB)

How to Root

Step 1. Download Odin and Stock Auto Root kernel file from above. [For T-Mobile and Canadian Galaxy S6 Edge Plus sets, Kernel 2 is recommended.]

Step 2. Install Galaxy S6 Edge+ driver (method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)

Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.7.exe (other files could be hidden, hence not visible).

Step 4. Disconnect your Galaxy S6 Edge+ from PC if it is connected.

Step 5. Enable OEM unlock on your device.

1. Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.
2. Go back to Settings, scroll down, and tap on ‘Developer options’.
3. Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.

— Also make sure you have disabled the Find My Mobile option completely in Settings > Lockscreen and security settings.

Step 6. Boot Galaxy S6 Edge+ into download mode:

1. Power off your Galaxy S6 Edge+. Wait 6-7 seconds after screen goes off.
2. Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
3. Press Volume Up to continue to download mode.

Step 7. Double click on extracted file of Odin, Odin3 v3.10.7.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.

Step 8. Connect your Galaxy S6 Edge+ to PC now using USB cable. Odin should recognize your Galaxy S6 Edge+. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.

• You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
• If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
• You can try different USB ports on your PC too, btw.

Step 9. Load the stock auto root kernel file into Odin. For this, click the AP button on Odin and the select the kernel file in .tar format.

Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.

Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy S6 Edge+. Wait till installation is finished, after which your Galaxy S6 Edge+ will reboot automatically. You’ll get PASS message as show below upon successful installation from Odin.

• If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
• If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.

Step 12. Install the SuperSU app from the play store. Open it, and you will have root access.

That’s it. Enjoy the Root access on your Galaxy S6 Edge+!

→ Additionally, if you want to install S6 Edge+ TWRP recovery, go here.

Factory Reset Protection!

Samsung – All New Models FRP (Factory Reset Protection) 
Lock Remove – One Click – Safe – No Root – No ADB –etc..
Samsung SPD
SM-G110B – Direct Unlock Including Hard Locked Phones.
SM-G110H – Direct Unlock Including Hard Locked Phones.
SM-G110M – Direct Unlock Including Hard Locked Phones.
SM-G130E – Direct Unlock Including Hard Locked Phones.
SM-G130H – Direct Unlock Including Hard Locked Phones.
SM-G130HN – Direct Unlock Including Hard Locked Phones.
SM-G130M – Direct Unlock Including Hard Locked Phones.
SM-G318H – Direct Unlock Including Hard Locked Phones.
SM-G355H – Direct Unlock Including Hard Locked Phones.
SM-G355HN – Direct Unlock Including Hard Locked Phones.
SM-G355M – Direct Unlock Including Hard Locked Phones.
What is FRP?
Android Factory Reset Protection (FRP) is a new feature to protect your device which has been added to several Samsung devices that are running Android OS 5.1 or higher.
allows you to set up your device to prevent other people from using it if it’s been reset to factory settings without your permission. For example, if your device is lost, stolen, flashed, or wiped, only someone with your Google account or screen lock information can perform a factory data reset and use the device.
When a device is factory reset, the device will not be able to be setup without the user entering the Google Account associated with the device (for hard reset) or screen lock information (for reset in Settings menu).
Important! You must set up a Google account in order to utilize the FRP feature. It is highly recommended that you set a secure screen lock on your device.
How do i know if my device have FRP LOCK Feature?
The availability of the FRP feature is dependent on your carrier and device model. To see if you have the FRP feature, follow these steps:
From the Home screen, touch Apps -> Settings -> Lock screen and security.
Note: If you have a Galaxy S6, touch Apps -> Settings -> Lock screen and security -> Find My Mobile.
If the Reactivation Lock feature is not shown, then you have the FRP feature.

More Updates

What's new ?
Support of LG Models For Remove Safe Talk
Model list:
G2
G3
G4
Without Adb
Without Root
Without Any Hassle

Unlocking of Samsung Google Account Verification Protection
So Called FRP.
No Need ADB
Rooting is NOT Necessary

1st SOLUTION !!
FRP Removing Include T and J series Models.
Added Remove Samsung Account lock
Called Re-Activation
without adb
Without root


Samsung EE/rent-a etc lock Remove
Exclusive !!
without adb
Without root
Non Exynos phones !!

Samsung M9KEFS Reset in Download Mode support.

Samsung MODEMST Reset in Download Mode support.

Support for Samsung PXA1908
Unlock
Cert read .
Use adb unlock
root need

LG Domestic Unlocking to use in USA G3
! Yea Baby it's Really
G3 Sprint unlock support including domestic use in USA
Without root
only lollipop OS
Google verification protection
Called FRP

.
LG FRP Removal For
LS991ZV5
H81110H
H34510B

Note2:If any problem come you can redo frp remove will restore phone from backup.. if phone is not formatted
Note3: remove google verification protection(FRP).
time service basic virus remove support..
Android  Virus Remove
WITHOUT ROOT

Stay tune for more updates